Saturday, September 15, 2012

McAfee's Knob and DIY Tarp Project

I had been planning an overnight camp trip for a couple of weeks and was finally able to make it happen this weekend.  My goal was to try out a new homemade plastic tarp, sharpen up some bushcrafting skills and techniques; and most importantly, spend some time with one of my boys. The outing took place near McAfee's Knob which is located near Roanoke, Virginia.  The hike is about 8 miles round-trip but worth the effort once you get to the Knob; revealing one of the finest views in Virginia.

Having seen this DIY tarp on a YouTube video a few months ago, I was convinced that this was a project that had the potential of being very cost effective and easy to pack.  Completing the project was really quite simple and can be completed in less than two hours.  The material list in putting this project together is inexpensive and includes the following items:
  1. Husky 9 X 12 Plastic Drop Cloth (2mil) from Home Depot ($2.98)
  2. Duct Tape-40yards from Home Depot ($4.89)
So, there you have it...  for under $8, I was able to make  a reasonably lightweight and reliable homemade tarp that provides for more than adequate shelter.  The whole project took about 1.5 hours to complete. The most time consuming
portion was in reinforcing the plactic with the duct tape; this included both sides of the edge, the center line and the diagonals.  By adding the diagonal reinforcement, it seemed logical that this would reduce the stress of the plastic when putting on a load when staking and tying down.  In addition I decided to use duct-tape straps instead of grommets on the tie ends.   The hexagonal shape provides excellent coverage and the whole tarp weighs about 22 ounces.  The entire tarp rolls up to approximately 5.25" X 7". With the cost of sil-nylon tarps and the like, this really is a remarkable and cost effective alternative that won't let you down.  While the durability is yet to be determined, I can't think of a reason why this tarp wouldn't find a place in my pack on every overnight outing going forward. By the way, this was the first overnight with a hammock  Besides not having to sleep on the ground, there are definitely some pluses in selecting this type of sleep system.  I need to spend additional nights trying to optimize this method, so it may be awhile before I post my thoughts.  On the other hand, the DIY tarp and hammock combo complimented each other very well.  ~Keep it Sharp.






Saturday, September 1, 2012

Enzo Trapper Knife Review



Back in March of this year I purchased an Enzo Trapper Knife kit from Curtis at Omaha Knife.  This was a straight forward knife kit that turned out exceptionally well.  The knife purchased was in O1 steel with Curly Birch handles.  While I never got around to posting pictures of the completed project, the Blue Ridge Survival Blog header has had a picture of this very knife.   I’ve been so impressed by this knife, I ordered and received my second Enzo Trapper earlier this week. 

Specifications:

Blade:  Full tang O1 tool steel with Scandinavian Grind– The Trapper is also available at Omaha Knife in D2 (both Scandi and Flat Grind), and 12c27 Stainless.  I have no doubt that D2 and 12c27 are excellent steels, especially since the Enzo brand represents high quality.  I purchased the O1 because I find it works well for me; I like the carbon steel and in terms of quality, ease of sharpening and edge retention the O1 steel has performed flawlessly.  From the factory this blade arrives hair popping sharp.  This type of grind lends itself especially well to bushcrafting tasks and is one of the simplest edges to sharpen.

The Trapper in Curly Birch was the first
acquisition.
Overall Length:  8 1/4” from tip to heel.  Blade length is 3 3/4".  Blade thickness is 1/8”.

Handle Material/Scales:  Burgundy Linen Micarta

Sheath:  The leather sheath is excellent and of very high quality.  The leather used to form the sheath is thick and comes with a dangler.  

Putting it all together...

As I said, this is a straight forward kit.  The kit was packed very well from Omaha Knife with the contents having the blade, handle material, corby brass bolts and a leather sheath.  The customer service from Omaha Knife is excellent.  I ordered the knife on Sunday and received it Wednesday.  I consider that very fast since the order could not get processed until Monday morning at the earliest. 

The scales that I 
ordered came pre-formed and pre-drilled, so the handle material is simply epoxied to the handle end of the blade, bolted and clamped.  The epoxy that I used is T-88 Structural Epoxy and it has a cure time of about 24 hours.    The next day after the epoxy cured, a Dremel tool was used to remove as much of the excess length from the brass bolts as possible.  I then used a small file to finish the brass pins flush with the handle.  The Dremel was also used to remove the excess handle material so that it's flush with the tang; I then followed up with 400 grit sandpaper on the handle material to smooth everything and round sharp corners.  Boiled Linseed Oil was then put on the handle and allowed to dry overnight.  Even with the Micarta handles, the Boiled Linseed Oil worked well.  Since this knife has the Micarta handle, I intend for this to be my primary workhorse.  I know all of this seems over simplified, but it really is a very straight forward knife kit.  I’ve been very pleased by the overall results and it’s satisfying to have built such a high quality knife.  This is a great weekend project that won’t take all weekend, so I highly recommend it.   ~Keep it Sharp.

Becker BK14 Neck Knife-Survival Kit




Whether I go out on a back woods camping trip or a simple day hike, I think about being prepared for the possibility that I might be out longer than intended.  So anticipating the challenges associated with spending a few more hours, an additional overnight or even a few more days, should be part of our physical and mental preparation. 

With that in mind I think along the lines of Shelter, Water, Fire, Signaling, Navigation and Food.  One of the basic kits that I carry is a Becker Bk-14 Neck Knife to accomplish this philosophy of survival.  By utilizing ranger bands (or bicycle inner tube) it is simple to create a personal survival kit.  Here is what is in my kit:

Shelter:  With a personal survival kit such as this, whatever clothing we have on would be considered our basic shelter.  Hopefully we have dressed appropriately to anticipate the season and any changes in the weather.  

Water:  I’ve included a Plastic 1-gallon storage bag.  This can be used to retrieve or collect water in multiple ways.  I always carry a water bottle so even if it becomes necessary to treat the water by boiling; a plastic bottle will do.  


Fire: The fire steel and Vaseline charged cotton ball (in tin foil) will easily initiate a fire.   Of course the Becker knife is excellent for making feather sticks and processing wood to build the fire.  

Signaling:  A small proton light and signaling mirror meets this requirement.  The signaling mirror is made from an aluminum can and has been highly polished. 

Navigation:  A simple button compass will provide the means for navigation in the general direction to safety.  




Food:  Fishing line and a fly from my fly-fishing gear will provide the means for food if I’m near a stream.  Included is a safety pin, just in cases I need to use live bait. 

The para-cord used around the neck and the knife handle provides for about 10 feet of cordage which can be used for a number of items including fishing and trapping.  All in all a very basic, concise and lightweight kit that has a survival form factor that will facilitate success when necessary.  ~Keep it Sharp.